• 👋Hello, please SIGN-UP FOR A FREE account and become a member of our community!
    You will then be able to start threads, post comments and send messages to other members. Thanks!
  • 💪IronMag Labs® 30% Off Easter Sale👉www.ironmaglabs.com Coupon code: EASTER30🐰

Liquidex's guide to brewing his personal favorite recipe

Liquidex

Registered
Joined
Sep 5, 2012
Messages
1,016
Reaction score
82
Points
48
Location
In a 30ml plastic bottle :)
Get Shredded!
Hello everyone, upon many PM regarding my previous recipe I got from other boards, I decided to post my corrected recipe to show people who wants to brew their own drinks so here it is :)

All of my juices will contain 3% benzyl alcohol and 15% benzyl benzoate for short esteres and the ones that are likely to crash, and just 3% benzyl alcohol for long esters that are not likely to crash. Im completely fine using 3% benzyl alcohol because I used my juice for long time and desensitised with it, so this recipe MAY or MAY NOT hurt for some people.


******ALL POWDER WEIGHT AND DENSITY ARE ASSUMED TO BE .85ml SO YOU MAY YIELD COUPLE ml LESS OR MORE OF FINAL PRODUCT AT THE END!!!*******


Before we even look into the brewing, check these first.

- Did you turn off Air conditioning unit
- Did you sterilize and clean the area where you will be brewing
- Are your brewing materials clean
- Did you wash your hands
- Do you have all the materials you need
- You sure you know what your brewing and not some random rat poison (Some powder sources actually did this to my friend, and his dog ate it before brewing and died before my friend brewed and take the juice)
- Did you put on curtains on windows so no one can see you brewing

-------------------------------------------------------------------------------------------------------

Now that you are ready, lets see what materials you need for brewing.

1. Legit powder
2. Several beakers
3. Sterile vials
4. .20um or .22 um syringe Filters if brewing less than 50ml, and bottle top for more than 50ml (NEVER EVER USE .45um unless you want to get infection)
5. Couple syringes to transport liquids into beakers and sterile vials
6. Oils (Preferably Grape seed oils as its pretty thin. You can use food grade grape seed oil too)
7. Electronic scale that goes below .001mg, preferably .0001 if you can find one
8. Stove
9. Benzyl alcohol
10. Benzyl benzoate
11. Face mask
12. Glove
13. Alcohol pads

-----------------------------------------------------------------------------------------------------------------

Steps on brewing.


1. Put beaker on the scale, tape down beakers weight to 0, then start add powder and measure the desired amount.

2. Now add amount of oil you need into the beaker, using a syringe.

3. Get a little bowl or bigger beaker, fill up with hot water, and bring the temperature to close to boiling points on stove.

4. Put a beaker containing measure powder into the bigger beaker or bowl containing boiling water.

5. Melt the powder completely, and start adding benzyl benzoate.

6. Stirr to mix the solution evenly.

7. Ones completely dissolved, get it out of the stove and cool it to the room temperature.

8. Ones cooled down, add benzyl alcohol to the solution.

9. You are now ready to filter, using either syringe filter or bottle top filters. Important!!! you MUST use .20 um or .22 um pore size!!!

10. You can directly put filtered oils into the vials if your using syringe filter, and if your using bottle tops, you have to manually transport the oils with syringes with hands from medium bottle.

11. Celebrate your amaizing brew

12. Tell mods on ASF to make this a sticky lolololol

-----------------------------------------------------------------------------------------------------

Now for the recipe when brewing with 50 grams of powder

1. Test-E/C at 250mg/ml, approximately 200 ml total produced. (3% BA, no BB)

-151.5ml of oil
-50 grams of powder
-6 ml of Benzyl alcohol
----------------------------------------------------
2. Test-P at 100mg/ml, approximately 500 ml total produced. (3% BA, 15% BB)

-367.5 ml of oil
-50 grams of powder
-15 ml of Benzyl alcohol
-75 ml of Benzyl benzoate
----------------------------------------------------
3. Tren-A at 100mg/ml approximately , 500 ml total produced. (3% BA, 15% BB)

-367.5 ml of oil
-50 grams of powder
-15 ml of Benzyl alcohol
-75 ml of Benzyl benzoate
----------------------------------------------------
4. Tren-E at 200mg/ml, approximately 250 ml total produced. (3% BA, 15% BB)

-162.5 ml of oil
-50 grams of powder
-7.5 ml of Benzyl alcohol
-37.5 ml of Benzyl benzoate
----------------------------------------------------


5. Deca at 250mg/ml, approximately 200 ml total produced. (3% BA, no BB)

-121.5ml of oil
-50 grams of powder
-6 ml of Benzyl alcohol
-30ml of Benzyl benzoate

-----------------------------------------------------

6. NPP at 100mg/ml, approximately 500 ml total produced. (3% BA, 15% BB)

-367.5 ml of oil
-50 grams of powder
-15 ml of Benzyl alcohol
-75 ml of Benzyl benzoate

------------------------------------------------------

7. EQ at 250mg/ml, approximately 200 ml total produced. (3% BA, 15% BB)

-121.5 ml of oil
-50 grams of powder (Measure the liquid weight in mg, not ml)
-6 ml of Benzyl alcohol
-30 ml of Benzyl benzoate

-------------------------------------------------------

8. Masterone-P at 150mg/ml, approximately 333.3 ml produced

-230.81ml of oil
-50 grams of powder
-10 ml of Benzyl alcohol
-50ml of Benzyl benzoate

--------------------------------------------------------


Now for the recipe when brewing with 100 grams of powder


1. Test-E/C at 250mg/ml, approximately 400 ml total produced. (3% BA, no BB)

-303 ml of oil
-100 grams of powder
-12 ml of Benzyl alcohol

---------------------------------------------------------

2. Test-P at 100mg/ml, approximately 1000 ml total produced. (3% BA, 15% BB)

-735 ml of oil
-100 grams of powder
-30 ml of Benzyl alcohol
-150 ml of Benzyl benzoate

----------------------------------------------------
3. Tren-A at 100mg/ml, approximately 1000 ml total produced. (3% BA, 15% BB)

-735 ml of oil
-100 grams of powder
-30 ml of Benzyl alcohol
-150 ml of Benzyl benzoate

----------------------------------------------------
4. Tren-E at 200mg/ml, approximately 500 ml total produced. (3% BA, 15% BB)

-325 ml of oil
-100 grams of powder
-15 ml of Benzyl alcohol
-75 ml of Benzyl benzoate

----------------------------------------------------


5. Deca at 250mg/ml, approximately 400 ml total produced. (3% BA, no BB)

-243 ml of oil
-100 grams of powder
-12 ml of Benzyl alcohol
-60 ml of Benzyl benzoate

-----------------------------------------------------

6. NPP at 100mg/ml, approximately 1000 ml total produced. (3% BA, 15% BB)

-735 ml of oil
-100 grams of powder
-30 ml of Benzyl alcohol
-150 ml of Benzyl benzoate

------------------------------------------------------

7. EQ at 250mg/ml, approximately 400 ml total produced. (3% BA, 15% BB)

-243 ml of oil
-100 grams of powder (Measure the liquid weight in mg, not ml)
-12 ml of Benzyl alcohol
-60 ml of Benzyl benzoate

-------------------------------------------------------

8. Masterone-P at 150mg/ml, approximately 666.6 ml produced

-461.21 ml of oil
-100 grams of powder
-19.98 ml of Benzyl alcohol
-99.9 ml of Benzyl benzoate

--------------------------------------------------------


Painful yet powerful series

1. Test-E/C at 400mg/ml, approximately 250 ml total produced. (3% BA, 15% BB)

-120 ml of oil
-100 grams of powder
-7.5 ml of Benzyl alcohol
-37.5 ml of Benzyl benzoate

--------------------------------------------------------

2. Test-P at 150mg/ml, approximately 666 ml total produced. (3% BA, 15% BB)

-461.21 ml of oil
-100 grams of powder
-19.98 ml of Benzyl alcohol
-99.9 ml of Benzyl benzoate

--------------------------------------------------------

3. Deca at 400mg/ml, approximately 250 ml total produced. (3% BA, 15% BB)

-120 ml of oil
-100 grams of powder
-7.5 ml of Benzyl alcohol
-37.5 ml of Benzyl benzoate

---------------------------------------------------------


Now for orals. Works pretty similar to injectables.

First put PEG into beaker, put into the microwave, and get it REALLY hot. Careful not to get on your skin, as it has higher boiling point than water so it will burn your skin right off. After heating up, put the powder, then stir untill everything is melted. Then put 190 proof alcohol. Store final solution in somewhere dark place.

1. Anavar at 50mg/ml, approximately 2000ml produced.

-1515ml of PEG 600
-100 grams of powder
-400ml of 190 proof alcohol

2. Liquidex(Me lol) at 1mg/ml, approximately 10,000ml produced.

-7991.5ml of PEG 600
-2000ml of 190 proof alcohol
-10 grams of powder

3. Liquid Aromasin at 25mg/ml, approximately 2000ml produced.

-1557.5ml of PEG 600
-50 grams of powder
-400ml of 190 proof alcohol

4. Liquid Dbol or Anadrol at 50mg/ml, approximately 2000ml produced.

- 1515 ml of PEG 600
- 100grams of powder
- 400 ml of 190 proof alcohol.
 
Great thread sir! Makes me want to start brewing myself
 
Why add the bb and ba at different times? Why not put them both in at the same time as the carrier oil? Also can you use 2% ba and 18% bb instead?
 
What about recipes for EO base oils?
 
Why add the bb and ba at different times? Why not put them both in at the same time as the carrier oil? Also can you use 2% ba and 18% bb instead?

You can absolutely use both benzyl alcohol and benzyl benzoate for ALL hormones. Reason why I used benzyl alcohol only on test-e is that Test e is VERY UNLIKELY to crash due to its long esters that benzyl benzoate is totally unnecessary unless you are brewing over 250mg/ml solutions like 400mg/ml.

And yes, you can do 2% BA and 18% BB. I just dont like using that much BB due to the fact that it is used in inceticides.
 
What about recipes for EO base oils?

Try 50% ehtyl olate and 50% oil, like when you need 40ml of oil to brew test-e at 250mg/ml, use 20ml of ethyl olate mixed with 20ml of oil. Should thin out the oil pretty good. You can also do higher EO ratio, like 60% EO to 40% oil. Keep in mind that some people are actually allergic to EO time to times
 
Yes, this I have read in regards to EO. I am no chemist but I may go down that road in the future. I have used and like EO based gear without any allergy that is why I asked. Do you use BA in it or methyl paraben like some of the UGLs do?
 
IML Gear Cream!
Yes, this I have read in regards to EO. I am no chemist but I may go down that road in the future. I have used and like EO based gear without any allergy that is why I asked. Do you use BA in it or methyl paraben like some of the UGLs do?

Hmmm not sure what your asking, but yes I use benzyl alcohol for ALL injections. Its kinda MUST really, as it makes the solutions bacteriostatic..
 
I find it better to add the BA and BB with the powder. Then place it in a hot water bath, no where near boiling... After that goes into solution, add the oil then keep heating for a few minutes.
 
I find it better to add the BA and BB with the powder. Then place it in a hot water bath, no where near boiling... After that goes into solution, add the oil then keep heating for a few minutes.

Why not in boiling water?
 
Why not in boiling water?

Because, like colochine said, you can easily degrade the substance if you get it too hot. Slow and steady here is the key. Use a big pot and put a little water in it just so the beaker won't float when it's in there. Turn the heat to like 2 or 3 and be paitent.
 
170 degrees is perfect for melting down the raws into a solution. I use a digital thermo gun to read my temps. works like a champ. I make some sexy gears. cholo has seen it;)
 
170 degrees is perfect for melting down the raws into a solution. I use a digital thermo gun to read my temps. works like a champ. I make some sexy gears. cholo has seen it;)

Going high tech I see lol Nice!!

- - - Updated - - -

Same here warm water bath. Less of a chance of degrading the hormone.

Plus you can tip over the beaker if the water is boiling
 
Curious, do you think Tren E at 250mg would hold and be smooth, I would assume yes?
 
170 degrees is perfect for melting down the raws into a solution. I use a digital thermo gun to read my temps. works like a champ. I make some sexy gears. cholo has seen it;)

You can't dangle this carrot, that's not fair.
 
Great info brother quick question when transferring oil from media bottle to sterile vial do you uncrimp the seal and take the rubber stopper out and shoot the goods into the bottle then wipe ring and stopper with alcohol and recrimp?
 
What exactly is 190 proof alchohol? I've never experimented with oral brewing.
 
Back
Top